Hostile Vehicle Mitigation: LPS 1175 & EN 12453 Security Gates | UAE Manufacturers
Security gates protect access points only when two disciplines meet: security and safety. Match LPS 1175 resistance to your threat profile, verify EN 12453 gate safety compliance for day-to-day use, and partner with a proven security gates manufacturer. Done right, you’ll deliver reliable protection that keeps people moving—without turning the site into a fortress.
Why security gates matter in city design
Urban planning isn’t just curb appeal—it’s flow, access, and safety. A well-placed security gate acts like a trained bouncer: firm when needed, invisible when not. Gates help prevent unauthorized entry, reduce tampering at critical assets, and coordinate traffic so vehicles and pedestrians don’t compete for space.
Planner’s quick wins
- Put the gate where the site already narrows (natural chokepoints).
- Separate vehicles and pedestrians early; don’t let queues overlap.
- Pair gates with hostile vehicle mitigation at the perimeter so high-energy impacts never reach operators or hinges.
The gate types you’ll specify most
Different sites, different mechanics. Choose the drive and movement before you fuss over finishes.
- Sliding gates – Good when you lack swing space. Robust for industrial aprons, logistics yards, and long-duty cycles.
- Swing gates – Familiar and elegant. Watch the arc, wind loading, and ground levels across the swing path.
- Bi-fold (speed) gates – Fast cycle times for busy entries; ideal when queues must stay short near public roads.
Quick comparison (for scannability)
| Gate Type | Best For | Throughput | Space Needs | Common Gotchas |
|---|---|---|---|---|
| Sliding | Industrial, logistics, tight depth | Medium | Rail/track + runback | Track debris; alignment |
| Swing | Residential, campuses, formal entries | Low–Medium | Swing arc clear | Wind loading; hinge wear |
| Bi-fold | Emergency lanes, peak traffic sites | High | Minimal depth | Correct safety zoning is critical |
The two standards your specification must name
Great gates fail when the spec forgets the fundamentals. Include both—every time.
- LPS 1175 (LPCB) – Measures resistance to forced entry using tool categories and time. Select the rating that fits your risk (e.g., from lower opportunistic attacks to more sustained, tool-assisted attempts). This is your security baseline.
- EN 12453 gate safety compliance – Governs safety in use for power-operated doors, gates, and barriers, covering presence detection, force limitation, and test methods to avoid crushing and shearing hazards. This is your safety baseline.
Plain-English rule: Pick your LPS 1175 rating for how hard the gate is to breach; prove EN 12453 for how safe it is to operate—day after day.
How to choose a security gates manufacturer
Not all partners are equal. The right security gates manufacturer (or gates manufacturer) should make your life easier from planning to maintenance.
Shortlist criteria
- Evidence of compliance – Current certification and documentation: LPS 1175 test reports; EN 12453 safety assessment with force and sensor test results.
- Integration track record – Clean interfaces to access control (cards, RFID/ANPR, biometrics), fire systems, and traffic signaling.
- UAE footprint – Spares, trained technicians, and realistic SLAs. Favor established gate manufacturers in UAE with live references in similar environments (heat, sand, saline air).
- Lifecycle support – Preventive maintenance schedules, operator training, and logbooks for audits.
Quick interview question: “Show me your EN 12453 test sheet for this exact model and the LPS 1175 rating evidence. When were they last updated?”
Design for security and flow (yes, both)
Security shouldn’t create gridlock. Start with geometry and throughput, then layer controls and safety.
- Use bi-fold gates where approach lanes are short and peaks are intense.
- Physically separate pedestrian routes (turnstiles) from vehicle lanes; different risks, different controls.
- Place hostile vehicle mitigation (bollards, blockers, barriers) outside the gate line, so impacts are absorbed before they touch moving leaves.
- Plan fail states: fail-safe vs. fail-secure aligned with life-safety and evacuation policies.
Access control that helps operations (not hinders it)
- RFID/ANPR keeps drivers in vehicles and lanes moving.
- Biometric readers add assurance at high-consequence zones.
- Anti-passback and time profiles stop “tailgating by schedule” without manual policing.
- Event logging (who, when, which lane) supports investigations and compliance.
UAE-specific considerations (because climate is a “spec item”)
Projects in the Gulf face unique conditions. Good gate manufacturers in UAE design for them.
- Sand and dust – Protected drive units, sealed bearings, and maintenance intervals that reflect reality.
- Heat – Duty cycles and motor ratings must assume summer peaks, not brochure weather.
- Corrosion – Finishes (galvanizing, powder/PU) matter as much as steel thickness; specify coating systems, not just colors.
- Power quality – Voltage stability and surge protection for control panels and sensors.
Mini-FAQ (for quick answers)
What is LPS 1175 and why should I specify it?
LPS 1175 is a performance standard for resistance to forced entry. It groups tools and attack durations into ratings so you can align the gate’s strength with your site’s threat profile. Specify the exact rating and model, not just “LPS 1175.”
What is EN 12453 gate safety compliance?
It’s the safety-in-use standard for powered gates and barriers. It requires presence detection, force limitation, and validated test methods to prevent crushing, shearing, and impact injuries. Ask for documented compliance for the exact model and configuration.
Do I also need hostile vehicle mitigation if I have a strong gate?
Usually yes. Bollards, barriers, or blockers keep high-energy impacts away from the gate line and operators. Think of HVM as the outer ring; the security gate is the controlled doorway behind it.
Which gate type is best for high-traffic entries?
Bi-fold (speed) gates generally offer the shortest cycle times and minimal depth, reducing queues near public roads. Pair with proper safety zoning to maintain EN 12453 compliance.
Bringing it together
Specifying a security gate isn’t a beauty contest—it’s a balance of security, safety, and operations. Choose mechanics that fit your site, mandate LPS 1175 for resistance, insist on EN 12453 gate safety compliance for everyday use, and partner with a capable gates manufacturer that can support you after handover. With the right plan—and the right security gates manufacturer—you’ll deliver a site that feels open, operates smoothly, and stays protected. Visit us at www.fpgulf.com.