Benefits & Features
- Successfully impact tested to the new International IWA 14-1 specification
- Bi-directional Hinged Gate; the impact beam can be opened in either direction depending on site requirements
- Sleek Design
- Manual operation; Ideal for remote locations with power supply restrictions.
- Easy to install and operate
- The Terra Ultimate 180° Hinged Gate is secured by an anti-tamper locking mechanism which encases the gates locking pin and is resistant from attack by a wide array of hand tools and battery powered tools.
- Maximum width: 4500mm
- Enhanced version of the Terra Ultimate 180 Swing Barrier which IWA 14 Tested dimensions : boom length 6000mm. Maximum Gate width 4500mm subject to height and infill
TROJAN ACTUATOR
- Designed to automate larger, heavier gates
- 100% duty rating – designed for continuous operation
- Underground and surface mounted models available
GATE BACK ACTUATOR
- A powerful yet compact motive unit which provides a solution for automating single leaf hinged gate (up to 4500m)
- 100% duty rating – designed for continuous operation
Options
- Accumulator or manual hand pump allow a number of operations in power failure mode
- In event of Power Failure options of Fail safe (remain in open position) or Fail secure (remain in closed position)
- 100/200mm Traffic Light System
- High Security Cabinet
- Can be interfaced to any access control systems
- Various infills available including, bar, mesh and sheet
Safety
- Vehicle detector loops
- Safety photocell beams
- Flashing beacons
- Audible alarm
- Safety Edge
Civil Requirements
- Gate base (millimetres)
L: 1800 x W: 2700 x D: 600 - Receptor post foundations (millimetres)
L: 1800 x W: 2700 x D: 600 - Dependent on Actuator
- Note: Power and control wiring ducts may be required
Electrical Requirements
- Dependent on automation
This is subject to a risk assessment to ensure the automatic equipment complies to BS EN 12453
The Terra Ultimate 180° Hinged Gate is the enhanced version of the Terra Ultimate 180° Swing Barrier; the IWA 14-1 impact tested, Bi-directional, Lightweight, manual swing HVM Gate which is easy to install and easy to operate.
The Terra Ultimate 180° Swing Gate has been successfully impact tested to IWA-1 stopping a 7.2t vehicle travelling at 80kph (50mph).
At the forefront of technology, the sleek, manually operated Terra Ultimate 180° Hinged Gate is the ideal solution for access points which need to be secured with occasional access, out of hours security, or remote locations with power supply restrictions.
The Terra Ultimate 180° Hinged Gate is easily installed requiring a typical foundation depth of 600mm (dependent on actuator), securing apertures up to 4500mm subject to height and infill. The Terra Ultimate 180° Hinged Gate is secured by an anti-tamper locking mechanism which encases the gates locking pin and is resistant from attack by a wide array of hand tools and battery powered tools.
The Terra Ultimate 180° Hinged Gate is a bi-directional HVM Gate, available with right or left hand hinging, therefore the impact beam can be opened in either direction depending on site requirements.
- IWA 14 Classification Code: V Swing Gate /7200[N2A]/80/90:4.7
- Width: Variable up to 4500mm
- Standard Height: 2400mm
- Variable Heights: 3000mm
- Enhanced version of the IWA 14 Terra Ultimate 180 Swing Barrier
- Tested dimensions of Terra Ultimate 180 Swing Barrier: width 6000mm
- Typical Foundation Depth 600mm (dependent on actuator)
- Bi-directional Hinged Gate; the impact beam can be opened in either direction depending on site requirements
- Sleek Design
- Construction: The gate is a fully welded construction of steel sections including specially designed Frontier Pitts’ Steel Impact Boom.
- Finish: Shotblasted, hot zinc sprayed (galvanised), primed and finished with a final coat of polyurethane paint.
- Manual operation; Ideal for remote locations with power supply restrictions.
- Can be automated. Please see our range of Actuators
- The Terra Ultimate 180° Hinged Gate is secured by an anti-tamper locking mechanism which encases the gates locking pin and is resistant from attack by a wide array of hand tools and battery powered tools.
- Accreditations: Secured by Design, BRE Global
- Signage: Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
- Traffic Lights: Traffic Light systems are highly recommended to be installed with all automatic systems to advise all users of its position. 100mm or 200mm LED Red/Green, Low Voltage traffic light heads can be pole or mounted on control cabinet mounted.
- Vehicle Detector Loops: Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the gate from closing on a vehicle within the aperture.
- Safety Photocells: Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
- Gate Safety Edge: Safety Edges are normally fitted to automatic gates. Safety edges are flexible rubber strips which are fitted to the leading edge of the moving art of the gate, if depressed, send a signal to the controller to stop the gate.
- Pedestrian Guard Rail: A Pedestrian Guard Rail (fence panels) should be fitted around the runback area of the gate. This is to prevent serious injury to a person should they stray into that area whilst the gate is operating.
- Sounder: Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.
- Flashing Beacon: Flashing Beacons provide a visual warning that the automatic equipment is in operation.
- Gate Infill: Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through. Other infills include palisade pales, sheet and wood infills. For more information please contact us.
Projects We Have Done
